Top 10 Centrifugal Clutch Diagram With Expert Recommendation

1. Vashly Go Kart Clutch 5/8″ Bore 11 Tooth for #35 Chain Predator 212 Clutch 11T Centrifugal Clutch Perfect for Go Kart, Minibike and Fun Kart Engine

  • 【11 Tooth Centrifugal Clutch】This go kart clutch 5/8″ Bore 11T for 35 Chain, Designed for Single Wheel Drive Karts with Tires no larger than 15″ Tall (Chain Not included).
  • 【Compatible】The centrifugal clutch 5/8 bore 11 tooth fit 2 – 6.5 HP 168 188 gasoline engines for minibike, generator, garden tractors, go karts, and for scooterx sport kart, mini bike, mini chopper, and mini motorcycles 2.8HP 97cc engines.
  • 【Product Material】 Go kart ​clutch is made of quality iron material, which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation.
  • 【Easy to Install】 Easy to install, Metric Property Class 8.8 Bolt and Washer Kit are Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft.Bi-directional Operation, Clutch Can Mount Inward or Outward on Crankshaft.
  • 【Before Purchasing】Please check carefully up and below information about our go kart clutch 5/8″ Bore 11T shaft fitment before your purchasing, If you have any question, please contact us first, thank you!

2. BETTERCLOUD 3/4″ Bore Go Kart Clutch Centrifugal Clutch Pulley Drive Compatible with GoKart Mini Bike 1/2″ AB Style Belt

  • 💫Band New 3/4″ bore Centrifugal Clutch With Pulley
  • 💫Compatible Belt: 1/2″ AB Style Belt
  • 💫For Carter Go Karts (Some) and Mini Bikes, Wood Chippers Etc, With Engines Up to 6.5HP
  • 💫Many DIY mechanics and garage project builders prefer the belt-drive over the more temperamental chain-drive system.
  • 💫It is important to have the correct gear ratio for the tire size for proper operation of your clutch or torque converter. A improper gear ratio will make the clutch or belt slip and cause damage to the unit very quickly.

3. MOOSUN Minibike Go Kart Clutch 3/4″ Bore 10 Tooth for #40/41/420 Chain

  • Compatible with 2-6.5hp Honda and Honda Cloned Engines GC160 GC190 GX120 GX140 GX160 GX200 Briggs and Stratton and 2-6.5 HP with 3/4″ Shaft Tecumseh Engines
  • Centrifugal Clutch 3/4″ bore, 10 Tooth for 40,41,420 chain, Up to7HP engines. Common clutch for 2-7hp engines 2300±300 RPM
  • 3/4″ Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts
  • 3 4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15″ Tall

4. Centrifugal Go Kart Clutch,KIOIPO,13HP Go Kart Centrifugal Clutch 1inch Bore 14T 14 Tooth For 40 41 420 Chain,1 Inch Clutch

  • 🌛Centrifugal clutch 1″ bore 14 tooth design. Suitable for 40-41-420 roller chain- up to 13hp horsepower.
  • 🌛A high quality and professional clutch. Engaging speed up to be 2300 RPM.
  • 🌛High impact,wear resistant that is super durable. Commonly used on go kart clutch, mini bikes.
  • 🌛Replace the old broken 1inch bore clutch 41 chain. The kind of dry clutch is unnecessary to be oiled, or the temperature of the surface will be easy to rise that also makes the clutch easy to smoke during the working.User-friendly controls for easy starting and operation.
  • 🌛[COMPATIBILITY and NOTICE]: Fits 13hp go kart centrifugal clutch 1inch bore 14t 14 tooth for 40 41 420 chain mx.The kind of dry clutch is unnecessary to be oiled, or the temperature of the surface will be easy to rise that also makes the clutch easy to smoke during the working.

5. New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4″ Bore Max Torque

  • This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4″ bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP
  • Featuring 6″ diameter with 3/4″ Bore, 3/16″ Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one.
  • This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load.
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car.

6. Go Kart Clutch 3/4 Bore 12T for #35 Chain, Predator 212 Engine Centrifugal Clutch, Up to 6.5 HP, Perfect for Go Kart, Mini Bike and Fun Kart Engine

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM. The 12T clutch has a broached 3/16″ keyway with two set screw holes located 90 degrees apart
  • Our go-kart clutch is made of high-grade steel, heavy-duty and long lasting. It can withstand the strain and heat caused by friction, once the clutch engages
  • Perfect for Go Kart, Minibike and Fun Kart. Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands
  • Go cart clutch kit includes two set screws, but chain is not included. The two set screw holes are tapped 1/4″-28

7. Centrifugal Clutch, Go Kart Clutch 3/4″ Bore 10 Tooth for #40/41/420 Chain, Fits for Mini Bike, Go Kart, predator 212, Lawnmower and Honda GC GX 2-6.5HP Engine

  • ★ Go Kart Clutch 3/4″ Bore 10 Tooth for #40/41/420 Chain, Fit for go kart, Mini Bike, Lawnmower and fun kart, 3/4″ Bore Designed for predator 212 Engines Clutch Performance Parts
  • ★ Centrifugal Clutch Fits 2-6.5HP Small Engines HONDA GX120, GX140, GX160, GX200, GC160, GC190
  • ★ Also fits any other engines with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clones, 6.5 HP clones and 2-6.5HP motors in all brands
  • ★ Tooth: 10 Tooth sprocket for #40/41/420 chain (Chain included)
  • ★ Clutch Easy installation, a perfect replacement part for your mini bike and go kart. Package included: 1 x Centrifugal Clutch; 1 x Chain;1 x Connecting Link

8. MooSun Centrifugal Clutch 3/4″ Bore #35 Chain 12 Tooth for Go Karts Mini Bike Replace Parts (12T Centrifugal Clutch with #35 Chain)

  • Centrifugal Clutch 3/4″ Bore 12 Tooth for 35 Chain Common clutch for 2-7 HP engines 2300±300 PRM
  • Fits Honda GX160 GX200 GX140 GX120 GC160 GC190 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc
  • Fit Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4″ shaft Tecumseh Engines
  • Also fits any other engines with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands
  • Go Kart Clutch kit includes two set screws and chain

9. Motovecor Centrifugal Clutch Go Kart Clutch Predator Engine Clutch Baja Mini Bike 3/4″ Inch Bore 12 Tooth 12T for #35 Chain 6.5HP – Upgrade

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 PRM
  • Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-6.5HP motors in all brands
  • Perfect for Go Kart, Minibike and Fun Kart
  • Go Kart Clutch kit includes two set screws, but chain is not included

10. Premium Clutch Assembly – Heavy Duty 3/4 Bore 10T Sprocket for #40 41 420 Chain – Universal Centrifugal Clutch for Go Kart, Minibike, ATV, Gas Scooter – Works with Honda, Briggs, Tecumseh Gas Engine

  • Heavy Duty Centrifugal Clutch Assembly – 3/4 Bore Shaft with 10 Tooth Sprocket for #40 #41 #420 Chain – Premium Replacement Clutch for Go Kart, Gas Scooter, Dirt Bike, Minibike, Pocket Bike, ATV – 3/4 Bore 10 Tooth 10T for #40 41 420 Chain Compatible with Honda, Briggs & Stratton, Tecumseh Gas Engines
  • Replacement Clutch for Honda – Compatible with Honda and Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200
  • New Clutch for Baja Mini Bikes – Perfect match for the Baja Mini Bike MB165, MB200, including Baja Heat, Mini Baja and the Baja Warrior
  • Clutch for Briggs & Stratton 2 to 6.5 HP Engines – Also fully compatible with Tecumseh Engines and works great with many other 2 to 6.5 HP with 3/4″ (.75 Inch) Crank Shaft.
  • Universal Fit 3/4″ Output Shaft – Our clutch also fits many other gas engines from 3.5 to 7 HP engines (2200 RPM) with 3/4 crank shafts. Compatible with many Gas Scooters, Go Karts, Water Pumps, Riding Lawn Mowers, Snow Blowers, ATV, Chopper, 5.5 HP clones (Chinese engine), 6.5 HP clones, and most 3.5 – 7 Horse Power Motors

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top