Top 10 Best Ape Hangers For Road King – Available On Market

1. Green-L 12″ Rise 1-1/4″ Ape Hanger Handlebar Fit for Harley Touring Road King Electra Glide Sportster XL883 XL1200 FLST FXST

  • Material: Iron
  • Color: Chrome / Black
  • Rise: 12″ / 14″ / 16″ / 18″
  • 1 1/4″-diameter center section tapers to 1″ so that standard handlebar controls fit.
  • Fit for all Harley Sportster XL, FLST, FXST, including Throttle-by-wire models, and any Custom Application.

2. WeiSen Chrome 10″ Ape Hanger Horn Easy Wire Handlebar Compatible with Harley Dyna Softail Sportster XL 883 1200 & 1994-2021 Road King & 1998-2013 Road Glide

  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & 1994-2021 Road King Model & 1998-2013 Road Glide.
  • Material: Steel pipe (Much Stronger than other’s Straight Seam Welded pipe handlebar on the market). Surface Finish: Triple Plating (Copper+Nickle+Chrome) ,High Standard Rust-Proof Plating which can be tested by salt spray 48 hours neutral.
  • Bar Diameter: 1-1/4 inch (1.25″). Center Width: 12 inch, Knurl Center to center Width: 5.4 inch & Clamp area Diameter: 1 inch. Grip Area Diameter: 1 inch. End Rise: 10 inch. Overall Width: 30.5 inch. Pullback/Sweep: 8 inch.
  • Model: Horn Ape Hanger Chizeled,Edge Cutting design for easy wiring. Pre-Drilled and Notched for TBW(Throttle By wire).
  • Package Included: 1x Chrome 10″ Ape Hanger Chizeled Easy Wire Handlebar.

3. Hill Country Customs 1 1/4″ Chrome Narrow 16″ Ape Hanger Handlebar Kit 1996-2006 Harley Road Glide, Road King models with Cruise Control – BSC-11416N-RGK06-C

  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! – This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley model.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Color Coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars. Harley heated grips will not work with these bars since the heater won’t fit inside.
  • Fits 1996-2006 Harley Road King and Road Glide models with Cruise Control and without ABS brakes. Handlebar Specs are:  Height 16″  Total Width 34″  Center Width 10″  Pullback 7.5″
  • Please read the Special Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #, Does it have Cruise Control? Fuel Injection? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB102 and installing the 1 piece top clamp: 55918-08 Installation kits are also available: 1996-1998 model part #: HC-HIK-01B, 1999-2004 model part #: HC-HIK-02B, 2005-2006 model part #: HC-HIK-03B

4. Hill Country Customs 1 1/4″ Chrome 16″ Ape Hanger Handlebar Kit for 1996-2006 Harley Road Glide, Road King models without Cruise Control – BSC-11416C-RGK06-NC

  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! – This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley model.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Color Coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars. If you have heated grips, you will need to purchase part # 2120-0498 heated grip extensions which are available in our store.
  • Fits 1996-2006 Harley Road King and Road Glide models without Cruise Control and without ABS brakes. Handlebar Specs are:  Height 16″  Total Width 36″  Center Width 10.5″  Pullback 7.5″
  • Please read the Special Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #, Does it have Cruise Control? Fuel Injection? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB102 and installing the 1 piece top clamp: 55918-08 Installation kits are also available: 1996-1998 model part #: HC-HIK-01B, 1999-2004 model part #: HC-HIK-02B, 2005-2006 model part #: HC-HIK-03B

5. WSays Chrome 10″ Rise Ape Hangers Handlebar 1-1/4″ Diameter Bar Compatible with Harley Sportster XL 1200 883 Dyna Softail Touring Road Glide Road King Models

  • Fitments:Harley Dyna Softail Sportster XL 883 1200 & 1994-2021Road King Model & 1998-2013 Road Glide.(Do not Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide,2008-2011 Harley Cross Bones FLSTSB with OEM risers.)
  • Chrome Material: Copper+Nickel+Chrome,High Standard Rust-Proof plating; Steel Pipe,much stronger than other Straight Seam Welded pipe.
  • Handle Bar Specifications: The handlebar end rise 10”, Pullback/Sweep: 8 inch;Bar Diamete:1-1/4 inch,Clamp Area Width: 5.4 inch & Diameter: 1 inch;Center Width: 10-1/2 inch, Grip Area Bar Diameter: 1 inch.Overall Width: 35.5 inch. Knurling Inside Width:2.5″ ; Outside Width:4.5″.
  • Easy Install: The Monkey Bagger Bar model with wiring holes, with Pre-Drilled, easy installation, it gives a wonderful driving experience.
  • Package include: 1x 10” Chrome Ape Hangers Handlebar.

6. Green-L Black 18″ Rise 1.25″ Ape Hanger Handlebar Fit for Harley Touring Road King Baggers FLHT Dressers FLHTC 1982-Up

  • 37″ wide from tip to tip.
  • 18″ rise. 11″ backward sweep.
  • 3-1/2″ on-center knurling for firm mounting.
  • 1 1/4″-diameter. Center section tapers to 1″ so that standard handlebar controls fit.
  • Fit for Harley Touring models, Dressers, Baggers, FLHT, FLHTC from 1982 to present including. May work on throttle-by-wire models with custom fitting and any custom application.

7. Pre Wired Dominator Industries 1 1/4 Inch Road King Special Meathook Monkey Bars Ape Hanger Handlebars, 16 Inch Rise, Gloss Black Compatible With 2017-2021 Harley Road King Special.

  • CONTROL COMPATIBILITY: This 1 1/4 Inch Road King Special Meathook Monkey Bars Ape is Compatible with all the Stock Cables and Controls on 2017-2020 Harley Road King Special.
  • MODEL COMPATIBILITY: Fits 2017-2020 model years of the Harley-Davidson Road King Special FLHRXS.
  • READY TO GO: Our Handlebars are Properly Plumbed for Internal Wiring and Notched for TBW Applications. What Does This Mean? Less Time Installing Your Handlebars and More Time RIDING!
  • QUALITY: Hand Made in the USA – Laser cut, fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show quality finish. Pre Wired For Quick And Easy Installation. All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment. No slag inside the bar tubes makes installation easy.
  • DOMINATOR: A NAME YOU CAN TRUST: Dominator Cycles is a Name You can Trust. We Produce High quality Handlebars Right Here in the States. Furthermore, Our Five Star Customer Service, Customized Products, and Limited Lifetime Warranty Will Make Dominator a Partner You and Your Bike can Partner with for Years to COME.

8. Dasen Chrome Ape Hangers Handlebar 12″ Rise 1 1/4″ Handle Bars Compatible with Harley Davidson Sportster Softail Dyna Touring Road Glide & King Models

  • Fitment: Fit most Harley Dyna Softail Sportster XL 883 1200 & Road King Model & 1998-2013 Road Glide, Fit 1994-2021 Road King (Do not fit Harley Electra Glide,Street Glide & 2014-UP Road Glide, Do not fit 2008-2011 Harley Cross Bones FLSTSB with OEM risers)
  • Finish: Triple Chrome Plating(Copper+Nickle+Chrome). Condition: Aftermarket 100% brand new and high q uality.Material: Steel pipe (Much Stronger than other’s Straight Seam Welded pipe handlebar on the market), superior quality and durable for long service life and rusting resistance.
  • Handle Bar Specifications: Bar Diameter: 1-1/4 inch. Center Width: 10-1/2 inch.Clamp Area Width: 5.4 inch & Diameter: 1 inch. Grip Area Bar Diameter: 1 inch. Pre-Drilled: Yes. End Rise: 12 inch. Model: Monkey Bagger Bar. Overall Width: 35.5 inch. Pullback/Sweep: 8 inch. Knurling Inside Width: 2.5″. Outside Width: 4.5″.
  • Pretty easy to install, no drilling required. Provide more comfortable driving experience and aggressive appearance.
  • Package include: 1x Ape Hangers Handlebar.

9. Pre Wired Dominator Industries 1 1/4 Inch Road King Special Meathook Monkey Bars Ape Hanger Handlebars, 14 Inch Rise, Gloss Black Compatible With 2017-2020 Harley Road King Special.

  • CONTROL COMPATIBILITY: This 1 1/4 Inch Road King Special Meathook Monkey Bars Ape is Compatible with all the stock cables & controls on 2017-2020 Harley Road King Special.
  • MODEL COMPATIBILITY: Fits 2017-2020 Harley Road King Special.
  • READY TO GO: Our Handlebars are Properly Plumbed for Internal Wiring and Notched for TBW Applications. What Does This Mean? Less Time Installing Your Handlebars and More Time RIDING!
  • QUALITY: Hand Made in the USA – Laser cut, fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show quality finish. All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment. No slag inside the bar tubes makes installation easy.
  • DOMINATOR: A NAME YOU CAN TRUST: Dominator Cycles is a Name You can Trust. We Produce High quality Handlebars Right Here in the States. Furthermore, Our Five Star Customer Service, Customized Products, and Limited Lifetime Warranty Will Make Dominator a Partner You and Your Bike can Partner with for Years to COME.

10. Hill Country Customs 1 1/4″ Chrome Narrow 14″ Ape Hanger Handlebar Kit 1996-2006 Harley Road Glide, Road King models without Cruise Control – BSC-11414N-RGK06-NC

  • NOTE: You Must provide us with the info about your Harley as shown in Bullet Point #5 so we can assemble your kit! – This is the most complete Basic Ape Hanger Handlebar Kit that you will find on Amazon. We include the Handlebars, extended length cables, extended length Front Brake line and Wiring Harness Extensions that fit your Harley model.
  • Stainless Braided Cables and Brake Lines have chrome ends and a clear UV resistant plastic Armor Coat to protect your paint and keep them looking good for a long time. Protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.
  • Color Coded wire extensions are included to extend all stock handlebar controls harnesses for your new handlebars. Harley heated grips will not work with these bars since the heater won’t fit inside.
  • Fits 1996-2006 Harley Road King and Road Glide models without Cruise Control and without ABS brakes. Handlebar Specs are:  Height 14″  Total Width 34″  Center Width 10″  Pullback 7.5″
  • Please read the Special Features and Description sections in this listing and then advise us of your Harleys: Year, Exact Model #, Does it have Cruise Control? Fuel Injection? Hydraulic Clutch? While installing these bars, we recommend replacing the riser bushings, part #: HC-HBB102 and installing the 1 piece top clamp: 55918-08 Installation kits are also available: 1996-1998 model part #: HC-HIK-01B, 1999-2004 model part #: HC-HIK-02B, 2005-2006 model part #: HC-HIK-03B

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top