Top 10 Best 1s Lipo Battery With Buying Guide

1. E-flite 150mAh 1S 3.7V 25C LiPo Battery: PH 1.5 (Ultra Micro) (x3), HHDEFLB1501S25

  • This is a bundle of 3 batteries

2. 4pcs 650mAh 1S Battery 3.8V HV LiPo Battery 60C with JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus 75mm Frame Kit Micro FPV Drone

  • This 650mah 1S lipo fits well into many FPV Racing Drones, including but not limited to the Inductrix FPV Plus Mobula 7 Eachine M80 Beta75Pro Mobula 7 HD
  • This FPV 1S battery is with the larger capacity of 650mAh, Small size of 59 * 16 * 7.5 mm, Light weight of 14.58g/pcs
  • GN3 650mah 1S battery has a PH2.0 connection like most all Whoop sized batteries, so it should connect to most all Micro FPV Drone
  • Please contact us in time when you receive the batteries that got puffed, we will take all responsibility for your satisfaction
  • Note: As a FPV battery, Don’t over-charge, or over-discharge batteries. Don’t put it beside the high temperature condition. Don’t throw it into fire. Don’t throw it into water

3. 1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

  • ONLY support LiPo 3.7V/4.20V 1S battery
  • Support 0.2A/0.6A charge current by switch button ( Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2)
  • USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
  • Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
  • The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.

4. Gaoneng 6pcs 380mAh HV 1S Lipo Battery FPV Battery 60C/120C 3.8V with PH 2.0 Powerwhoop Connector for UZ65 US65 Tiny Whoop Drone Blade Inductrix

  • High capacity of 380mah 60C, Small size of 62 * 11 * 7mm, is the great choice of Tiny Whoop Blade inductrix
  • The battery connector is PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
  • This 380mah HV 1S Lipo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 8g per unit
  • GAONENG 380mah Battery is Great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x
  • Caution: As a FPV battery, Don’t over-charge, or over-discharge batteries. Don’t put it beside the high temperature condition. Don’t throw it into fire. Don’t throw it into water

5. 8PCS Gaoneng 650mAh 1S LiPo Battery 3.8V HV 60C with JST-PH 2.0 PowerWhoop mCPX Connector for Mobula 7 Inductrix FPV Plus 75mm Frame Kit Micro FPV Drone

  • * This 650mah 1S lipo fits well into many FPV Racing Drones, including but not limited to the Inductrix FPV Plus, Mobula 7, Eachine M80, Beta75Pro, Mobula 7 HD and tinyhawk freestyle
  • * Same weight as 450mah 1s with way better flight times and performance. Only weight of 14.58g/pcs, small size of 59 * 16 * 7.5 mm
  • * This FPV 1S battery is with the larger capacity of 650mAh, C-rating 60c burst 120c
  • * GN3 650mah 1S battery has a PH2.0 connection like most all Whoop sized batteries, so it should connect to most all Micro FPV Drone
  • * Please contact us in time when you receive the batteries that got puffed, we will take all responsibility for your satisfaction

6. 4pcs GNB 450mAh 1S HV LiPo Battery JST-PH 2.0 3.8V 80C PowerWhoop mCPX Connector for EMAX Tinyhawk 2 Micro FPV Racing Drone (450mAh 1s)

  • 【Upgrade Version 】1S HV 350mAh battery is the great choice of Tiny Whoop Blade inductrix with the connector plug of JST-PH2.0 PowerWhoop connector
  • 【Capacity】450 mAh, Voltage: 3.80V/4.35V, Connector: JST-PH 2.0 AKA Powerwhoop, mCPX
  • 【Rate】Discharge Rate:80C, Max Burst discharge Rate: 160C
  • 【Net Weight】14g, Dimensions: 7mm*18mm*59mm (H*W*L)
  • 【Higher Quality】Safer,durable and more poewrful rate gives you higher speed flying experience

7. 4pcs 250mAh 1S LiPo Battery 3.7V 30C Blade Inductrix Battery Micro JST 1.25 Connector for Kingkong Tiny 6 Tiny Whoop FPV Racing Drone

  • [Dimension] – High capacity of 250mAh 30C, Small size of 55x11x5mm, is the great choice of Tiny Whoop FPV Racing Drone
  • [Upgraded Version] – 30c Discharge built to fit perfectly in your Blade Inductrix, Tiny Whoop.This LiPo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 6.6g per unit
  • [Durable] – Equipped with High current ultra micro, it’s sturdy and can deliver the right voltage consistently without breaking over time
  • [Wide application] – This LiPo Battery is great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x
  • [Note] – Don’t over-charge, or over-discharge batteries. Do not use inferior chargers. Don’t put it beside the high temperature condition. Don’t use high current charging frequently.If the battery cannot be used, please contact us immediately! !

8. GAONENG 6pcs 380mAh 60C 1S LiPo Battery 3.8V/4.35V LiHv Battery with JST-PH 2.0 Connector for UZ65 Tiny Whoop Micro FPV Racing Drone

  • The ultra 380mAh 1S LiPo Battery for Tiny Whoop Blade Inductrix(Need PH2.0 Upgrade)Quadcopter.
  • Battery Size:62*11*7.0mm, Weight: 8g/per unit, Connector: PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
  • The weight of the 380mAh 1S Lipo battery is 0.7g heavier than the 300mAh battery, better performance than it.
  • Newly developed chemistry 380mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
  • Note: Don’t over-charge, or over-discharge batteries. Do not use inferior chargers. Don’t put it beside the high temperature condition. Don’t use high current charging frequently.

9. 6pcs 450mAh 1S LiPo Batteries 3.8v HV PH2.0 80C LiHV Battery Compatible for 1S Racing Drone Quadcopter EMAX TinyHawk HAPPYMODEL Snapper7

  • GaoNeng (GNB) self-products Grade-A cells push the limits of batteries by utilizing new high power cell technology, GNB batteries are compact and lightweight, maximizing your power to weight ratio.
  • C-rating 80c burst 160c, Dimensions(L*W*H) : 60* 18.5* 6.5 mm, Approx Weight: 13.5g
  • GNB 1S 450mAh 3.8v HV LiPo battery PH2.0 with soft silicone wire, better flying experiece than others.
  • Compatible with micro FPV racing drone brushless quadcopter TinyHawk Inductrix FPV Plus Kingkong Tiny 7 Beta75S etc.
  • What You Get: 6x450mAh 1S 3.8V LiPo Battery PH2.0, 1xSticker, 1xUser Instruction

10. 4pcs 520mAh 1S LiPo Battery 80C 3.8V HV LiHv Battery JST-PH 2.0 PowerWhoop mCPX Connector Upgraded for Inductrix FPV Plus EMAX Tinyhawk Micro FPV Racing Drone xt60 for Drone

  • Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, Eachine trashcan, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7
  • This FPV 1S battery’s discharge rate is 80C, Small size of 64 * 15 * 6 mm, Light weight of 13.42g/pc, you can get a long flight time and more power while staying at a suitable weight
  • The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it
  • Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation
  • Note: Don’t over-charge, or over-discharge batteries. Do not use inferior chargers. Don’t put it beside the high temperature condition. Don’t use high current charging frequently.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top