🌛Centrifugal clutch 1″ bore 14 tooth design. Suitable for 40-41-420 roller chain- up to 13hp horsepower.
🌛A high quality and professional clutch. Engaging speed up to be 2300 RPM.
🌛High impact,wear resistant that is super durable. Commonly used on go kart clutch, mini bikes.
🌛Replace the old broken 1inch bore clutch 41 chain. The kind of dry clutch is unnecessary to be oiled, or the temperature of the surface will be easy to rise that also makes the clutch easy to smoke during the working.User-friendly controls for easy starting and operation.
🌛[COMPATIBILITY and NOTICE]: Fits 13hp go kart centrifugal clutch 1inch bore 14t 14 tooth for 40 41 420 chain mx.The kind of dry clutch is unnecessary to be oiled, or the temperature of the surface will be easy to rise that also makes the clutch easy to smoke during the working.
4. Complete Torque Converter Go Kart Clutch Kit Set 3/4inch 10T #40/41 and 12T #35 Chain Replacement for 218353A Manco Comet TAV2
Replace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4″shaft with flat key
Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
12T sprocket for #35 chain and 10T sprocket for 41/40 chain drive clutch bore 3/4″(19mm)
Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
5. LotFancy Go Kart Clutch 3/4 Bore 10T for #40 41 420 Chain, Predator 212 Centrifugal Clutch, Up to 6.5 HP, Fit for Go Kart Minibike Baja Mini Bike MB165 MB200
Centrifugal Clutch 3/4″ bore for 212cc Predator Engines, 10 Tooth for 40,41,420 chain, Up to7HP engines. Common clutch for 2-7hp engines 2300 RPM
Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior
Compatible with 2-6.5hp Honda and Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs and Stratton and 2-6.5 HP with 3/4” Shaft Tecumseh Engines
Mounts onto crankshaft using bolt and washer on the end of the crankshaft
Set screws and chain NOT included. Suitable for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15″ Tall
6. Centrifugal Clutch, Go Kart Clutch 3/4″ Bore 10 Tooth for #40/41/420 Chain, Fits for Mini Bike, Go Kart, predator 212, Lawnmower and Honda GC GX 2-6.5HP Engine
★ Go Kart Clutch 3/4″ Bore 10 Tooth for #40/41/420 Chain, Fit for go kart, Mini Bike, Lawnmower and fun kart, 3/4″ Bore Designed for predator 212 Engines Clutch Performance Parts
★ Also fits any other engines with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clones, 6.5 HP clones and 2-6.5HP motors in all brands
★ Tooth: 10 Tooth sprocket for #40/41/420 chain (Chain included)
★ Clutch Easy installation, a perfect replacement part for your mini bike and go kart. Package included: 1 x Centrifugal Clutch; 1 x Chain;1 x Connecting Link
7. Premium Clutch Assembly – Heavy Duty 3/4 Bore 10T Sprocket for #40 41 420 Chain – Universal Centrifugal Clutch for Go Kart, Minibike, ATV, Gas Scooter – Works with Honda, Briggs, Tecumseh Gas Engine
Heavy Duty Centrifugal Clutch Assembly – 3/4 Bore Shaft with 10 Tooth Sprocket for #40 #41 #420 Chain – Premium Replacement Clutch for Go Kart, Gas Scooter, Dirt Bike, Minibike, Pocket Bike, ATV – 3/4 Bore 10 Tooth 10T for #40 41 420 Chain Compatible with Honda, Briggs & Stratton, Tecumseh Gas Engines
Replacement Clutch for Honda – Compatible with Honda and Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200
New Clutch for Baja Mini Bikes – Perfect match for the Baja Mini Bike MB165, MB200, including Baja Heat, Mini Baja and the Baja Warrior
Clutch for Briggs & Stratton 2 to 6.5 HP Engines – Also fully compatible with Tecumseh Engines and works great with many other 2 to 6.5 HP with 3/4″ (.75 Inch) Crank Shaft.
Universal Fit 3/4″ Output Shaft – Our clutch also fits many other gas engines from 3.5 to 7 HP engines (2200 RPM) with 3/4 crank shafts. Compatible with many Gas Scooters, Go Karts, Water Pumps, Riding Lawn Mowers, Snow Blowers, ATV, Chopper, 5.5 HP clones (Chinese engine), 6.5 HP clones, and most 3.5 – 7 Horse Power Motors
8. ECCPP Go Kart Clutch 1 Bore 14 Tooth compatible with 40/41/420 Chain for Mini Bike Centrifugal Clutch
Direct replacement fits 1 standard crankshaft, built-in square key and set screw. This clutch compatible with most for Mini Bikes and Go Carts equipped with 40/41/420 chain
Thermodynamically designed clutch shoe increases the clutchs capacity to absorb heat without damaging the clutch springs, ensures a longer life ad reliability.
Pls use engine crankshaft diameter and chain size to choose the clutch you needed.
Engineered to reduce failures. Quality tested for trouble-free performance. Quick and easy installation.
Please check picture and description before placing order. Feel free to tell us via Email if any quality problem or dissatisfaction occurs
9. AlveyTech Heavy Duty Clutch Assembly with 1″ Bore & #40/41/420 Chain Sprocket for Go-Karts & Mini Bikes (10 Tooth Sprocket)
Fits many belt-drive bikes & ‘karts. DIY and save money
Good clutch for a home project.
Monster Scooter Parts is an authorized Monster Motion dealer
10. Mophorn Torque Converter CVT 2HP-7HP 3/4″ Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt
Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life.
Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter.
Quality Drive Clutch: We have a 3/4” Driver Pulley and a 5/8” bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems.
Vehicle Fitment: The torque converter is compatible with 3/4″ & 5/8″ straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes.
Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4″ driver pulley. 1 x 5/8″ bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware.
