Top #10 Audi A6 Bluetooth Module – Available On Market

1. 2021Carlinkit Wireless Carplay Module Receiver Box for Audi A4/A5/S4/S5/RS4/RS5/Q5 MMI (2010-2017) Carplay Retrofit Accessories,Support Wireless Mirroring, Reverse Track, Android Auto

  • 1.Product contact-1 x car-play box, 1 x antenna, 1 x CVBS/TPMS cable( included USB,Ground wire,front&rear view wire,Reversing detection cable,12v rear view power cable),1 x Host cable,1 x Car screen cable
  • 2.Applicable Phone Models-This product support iphone5 and above model, ios 10 and above as well as Android moble phone, connect your car video system to access message,listen music,to use navigation and play with U disk playback.Google Maps for IOS 12 used,If you iphone is not IOS 12, you can update the phone system then use it. It also fit for audi B9/C7/Q3(without navigation)
  • 3.Using-Support steering wheel button, knob operation, voice operation.Use the original car microphone to control the apks with your voice when you are driving on the road.
  • 4.Friendly Note – Install this product need use your AUX ,please make sure that your AUX is activation.And please find a professional master to install if you are not familiar with the product
  • 5.Quality Warranty – We do strict quality control,we will check and use it before delivery to ensure every products can be used.If you can’t install or other problems,please contact us,we will provide professional assistance.

2. HiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED.
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode.
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board

3. FOXWELL NT301 OBD2 Scanner Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light

  • 【Vehicle CEL Doctor】The NT301 obd2 scanner enables you to read DTCs, locate bad O2 sensors, access to emissions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle.
  • 【Accuracy & Streams】Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.
  • 【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8″ color screen, Free Lifetime Update and 1-year seller assurance with EXCLUSIVE tech and service team.
  • 【Smog Check Helper】Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident emissions test.
  • 【Home Necessity】Open to global customers. No battery required, NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and one of the best gifts for Home and Autoshop Mechanics.
  • 【Please Note】Dear customer, if you are not pleased with your NT301 and choose to return it, please kindly mark it unsellable to avoid an used one is resold again to other customers. Appreciate very much!
  • 【Warm Tips】NT301 car scanner can be used directly with no need for registration or update, as it is already the latest version. Your Foxwell’s screen is with a tightly-fitting screen protector. If any scratches are found, just tear off the screen protector from the upper left or upper right corner. 🙂

4. Metra Axxess ASWC-1 Steering Wheel Control Interface

  • One interface does it all – No additional interface needed
  • Designed to be compatible with all major radio brands
  • Auto detects vehicle type, radio connection, and presets controls
  • Ability to dual assign steering wheel control buttons
  • Can be manually programmed for most vehicles. Provides Speed Dependent Volume Control on select CAN data vehicles

5. Bingfu Vehicle 4G LTE Cellular WiFi Bluetooth 2.4GHz Hidden Antenna for BMW Volkswagen Audi Mecedes Benz VW Vehicle SUV Car Stereo Carplay TCU Telematics Security Bluetooth Module Head Unit Receiver

  • Frequency Range: 4G LTE Cellular 698MHz – 2690MHz; WiFi 2.4GHz; Bluetooth 2.4GHz;
  • Feature: Adhesive Mounting;
  • Cable: 3m / 10 feet Cable; Connector: Fakra Z Female Water Blue Connector;
  • Package List: 1 x Antenna (As the Picture Shown)
  • Application: Car 4G LTE Cellular TCU Telematics System; Vehicle Remote Security Alarm System; Car Media Head Unit Receiver Bluetooth Module; Car Stereo WiFi Hotspot;

6. Airdual Bluetooth 5.0 Adapter Compatible for Audi MMI 3G AMI Music Interface,Audi Symphony,Audi Concert,VW MDI,Mercedes Media Interface

  • [UPGRADE YOUR CAR WITH BLUETOOTH MUSIC STREAMING] Compatible for Audi MMI 3G, 3G+ from 2009 year+, Audi Concert/Symphony, VW RNS 510 from 2009 year+, VW 3G for RNS 315 from 2009 year+, VW Premium 8 systems from 2009 year+. NOT compatible for Audi MMI/AMI 2G ranged from 2004 year to 2009 year. NOT compatible for Audi Navigation Plus. Doesn’t support phone call
  • [POWERED BY QUALCOMM CSR8675 CHIPSET] Adopted powerful Qualcomm CSR8675 chipset for better sound quality experience. Support 24Bit audio processing and 120MHz DSP, support APTX, APTX-LL, APTX-HD high-quality transmission format
  • [PLUG, PAIR, PLAY] Just plug our adapter into AMI/MDI connector usually found in glove box or center console, pair the bluetooth, and play music. Enjoy bluetooth music streaming, no more installation required
  • [SUPPORT STEERING WHEEL SONG BUTTON CONTROL] Using steering song buttons to control music previous/next tracks. Driving safer while changing songs
  • [SUPPORT HEAD UNIT RADIO BUTTON CONTROL] Using head unit radio buttons to control music. Only support Apple Music playlist display, NOT support Spotify/Pandora playlist display

7. Moker AMI MMI Bluetooth Car Kit – Compatible with Audi A3 A4 A5 A6 A7 S3 S4 Q3 Q5 Q7,Wireless Music Interface AMI MMI Adapter,Works with Apple iPhone iPod Android Smart Phone

  • *Let the Fun Begin* Listen to content from your Bluetooth capable device over your car’s stereo system using the Bluetooth adapter.Works with any Apple, Android or any other Bluetooth capable device including iPhone xs and Samsung Galaxy 9
  • *High-Quality Design* Bluetooth Music Streaming for Mercedes Media Interface.Built-in Bluetooth 4.2 with EDR and AptX module for premium sound quality
  • *Plug and Play* Activate the AUX mode in the MMI system and connect your smartphone with this bluetooth adapter, then you can listen music via the car stereo.For Bluetooth mode,you can only change songs from the smartphone, no control over music from the MMI system.The playlist will not be displayed on the scree
  • This Buletooth adapter fits Audi and VW group cars with AMI or MDI port with 2G 3G 3G+ AMI MMI.Symphony,Concert and Navigation Plug models
  • NOTES *** Once plugging the AMI port it doesn’t turn light on,Please connect the extra USB connector to cigarette lighter in advance for getting power. USB lead is 3ft long, so it is long enough to reach the cigarette lighter port and it is also very thin, so it will be easy to hide it and it can be placed between closed glove box doors.

8. Bluetooth Audio Adapter for Music Streaming Sound System, Esinkin Wireless Audio Adapter Works with Smartphones and Tablets, Wireless Adapter for Speakers

  • Listen music wireless: Stream your audio entertainment from your smart phone or tablet. Listen music through your perfect sound system from your smart phone or tablet with perfect sound quality
  • Easy to setup: Simply pair your smart phone or tablet to the audio adapter with a single button
  • Wireless range: Do not have to dock your mobile device with reliable audio connection and it can receive music from up to 10-12 meters( 30-40 feet) away
  • Works with most speakers, Superior acoustics: Plug the adapter into any A/V receivers and any powered speakers with standard RCA or 3.5 mm jacks. Don’t compromise on sound delivers high quality acoustics
  • NOTE: The speakers are demonstrations in the image which are not included in the package. This item is a bluetooth receiver for speakers.

9. DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano

  • Low Energy: With HM-10 bluetooth 4.0 module, you can add Bluetooth features to your project and support iphone4s or later.
  • DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project
  • Led status indication: when the connection is established will always light, disconnection is flash
  • iBeacon Support:You
    can
    make this module into ibeacon mode.So you can have your own ibeacon.it also Supports Apple Notification Center Service (ANCS)
  • working voltage 3.6 V to 6V,Default rate of 9600. DSD TECH back this Bluetooth 4.0 LE module with ONE Year WARRANTY. If you meet any question, please contact us, we will fix your issue within 24 hours.

10. Moker Bluetooth Receiver Car Kit Compatible with Audi A3 A4 A5 A6 A7 S3 S4 Q3 Q5 Q7,Wireless Music Interface AMI MMI Adapter,Premium CSR Chipset HiFi Sound,Works with Apple iPhone iPod Android

  • *Let the Fun Begin* Listen to content from your Bluetooth capable device over your car’s stereo system using the Bluetooth adapter.Works with any Apple, Android or any other Bluetooth capable device including iPhone xs and Samsung Galaxy 9
  • *High-Quality Design* Bluetooth Music Streaming for Audi Music Interface.Built-in Bluetooth 5.0 with EDR and AptX module for premium sound quality
  • *Plug and Play* Activate the AUX mode in the MMI system and connect your smartphone with this bluetooth adapter, then you can listen music via the car stereo.For Bluetooth mode,you can only change songs from the smartphone, no control over music from the MMI system.The playlist will not be displayed on the scree
  • This Buletooth adapter fits Audi and VW group cars with AMI or MDI port with 2G 3G 3G+ AMI MMI.Symphony,Concert and Navigation Plug models
  • NOTES *** Once plugging the AMI port it doesn’t turn light on,Please connect the extra USB connector to cigarette lighter in advance for getting power. USB lead is 3ft long, so it is long enough to reach the cigarette lighter port and it is also very thin, so it will be easy to hide it and it can be placed between closed glove box doors.

Scroll to Top