Top 10 Best 1s Tiny Whoop Battery With Expert Recommendation

1. 4pcs 230mAh 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

Check Discount Price

• Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation
• Capacity: Standard voltage (4.2v, 230mah)or High voltage (4.35v, 250ish mah)
• Tiny Whoop Blade inductrix future choice of battery
• The connector plug: JST-PH2.0 AKA High current ultra micro, Powerwhoop , mCPX
• Dimension: 54mm * 12.5mm * 6mm, Weight: 6.3g/per unit

2. Gaoneng 6pcs 380mAh HV 1S Lipo Battery FPV Battery 60C/120C 3.8V with PH 2.0 Powerwhoop Connector for UZ65 US65 Tiny Whoop Drone Blade Inductrix

Check Discount Price

• High capacity of 380mah 60C, Small size of 62 * 11 * 7mm, is the great choice of Tiny Whoop Blade inductrix
• The battery connector is PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
• This 380mah HV 1S Lipo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 8g per unit
• GAONENG 380mah Battery is Great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x
• Caution: As a FPV battery, Don’t over-charge, or over-discharge batteries. Don’t put it beside the high temperature condition. Don’t throw it into fire. Don’t throw it into water

3. BETAFPV 4pcs BT2.0 450mAh 1S Battery 4.35V 30C/60C FPV Lipo with BT2.0 Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Like Meteor75 Cetus Pro FPV Kit HX115 ELRS

Check Discount Price

• 【1.0mm Banana Connector】BT2.0 connector AKA 1.0mm Banana Connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector
• 【Discharge Rate】By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning
• 【High efficiency】BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with it
• 【More durable】Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power
• 【High quality】High-end technology to guarantee high quality and consistent performance. If any problem with our product, please feel free to contact us.

4. 4pcs 600mAh 1S 3.7V LiPo Battery 50C JST-PH 2.0 PowerWhoop mCPX Connector Rechargeable 1S LiPo Battery for Inductrix FPV Plus Tiny Whoop FPV Racing Drone

Check Discount Price

• ★Capacity: 600mAh 50C 3.7V,the 600mAh large capacity offers you a long flying time.
• ★Light weight reliable,50C Discharge Rate,High-grade Lipo cell is highly reliable and durable for long-lasting use.
• ★To fit for Mobula 7 HD Snapper7 Tinyhawk Freestyle Race Beta75 Pro Beta75S Eachine M80 Trashcan Kingkong Tiny 7 Inductrix FPV Plus 75mm FPV Racing Drone .NOT for Inductrix FPV
• ★The connector plug: JST-PH2.0 AKA High current ultra micro, Powerwhoop, mCPX.
• ★Newly developed chemistry 1S Battery, Much more Safer, higher quality and more poewrful rate gives you higher speed flying experience.

5. AOK-041 1S LiPo Battery Voltage Checker Tester for Tiny Whoop Blade Inductrix Quadcopter with Micro JST 1.25 JST-PH 2.0 Micro Losi and JST Connector

Check Discount Price

• Support four standard micro UAV battery interface, plug and check, dimensions: 43x23x15mm, weight: 10g
• 0.36 inches red digital tube display, display battery voltage, battery voltage detection accuracy is accurate to 10mV
• Supporting ports JST(2.54mm), MOLEX(2.0mm), mCPX(2.0mm), MCX(1.25mm)
• Support lithium battery LiFe(3.3/3.65V), LiPo (3.7/4.20V),Li-Hv(3.8/4.35V)
• Four battery interfaces support battery polarity reverse connection protection, four battery interfaces are supported LiFe,LiPo,LiHv

6. Infinity 1S 450mah Lipo Battery 3.8v 85C JST-PH2.0 HV LiHV Batteries for 1S Racing Drone Quadcopter EMAX TinyHawk Indoor Micro FPV

Check Discount Price

• Fit for EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus Arris X80 1S Kingkong Tiny 7 Snapper7 Beta75S Micro FPV Racing Drone
• Capacity: 450 mAh, Rate: 85C, Voltage: 3.80V, Connector: JST-PH 2.0
• Weight: 14g，Dimension: ,59 * 17 * 6.2mm/2.32*0.67*0.24in
• The flight time largely depends on the difficulty of your flight and the level of your battery
• Please contact us in time hen you have any questions about the battery , we will take all responsibility for your satisfaction connector

7. Upgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

Check Discount Price

• ONLY support LiHV 3.8V/4.35V 1S battery, not for 3.7V/4.20V 1S LiPo battery
• Support 0.2A/0.6A charge current by switch button （ Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2）
• USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
• Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
• The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.

8. UP-S6 1S LiPo Battery Charger LiPo/LiHV Charger for Blade Inductrix Tiny Whoop mCX mCPX Micro Losi Connector

Check Discount Price

• Six independent ports can be used at the same time. Three different kinds of battery connectors in each port：Micro. MX, mCPX
• Adjustable charging current from 0.1-1.0A, support Battery type：LiPo/LiHV
• USB port (5V/2.1 A) for charging iPad, mobile phones, digital cameras, etc.
• Maximum protection: battery reverse polarity protection. battery over voltage protection and DC input voltage protection
• Note: Power adapter sold separately!

9. GAONENG 6pcs 380mAh 60C 1S LiPo Battery 3.8V/4.35V LiHv Battery with JST-PH 2.0 Connector for UZ65 Tiny Whoop Micro FPV Racing Drone

Check Discount Price

• The ultra 380mAh 1S LiPo Battery for Tiny Whoop Blade Inductrix（Need PH2.0 Upgrade）Quadcopter.
• Battery Size:62*11*7.0mm, Weight: 8g/per unit, Connector: PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
• The weight of the 380mAh 1S Lipo battery is 0.7g heavier than the 300mAh battery, better performance than it.
• Newly developed chemistry 380mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
• Note: Don’t over-charge, or over-discharge batteries. Do not use inferior chargers. Don’t put it beside the high temperature condition. Don’t use high current charging frequently.

10. 6pcs 350mAh HV 1S Lipo Battery 30C 3.8V JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Micro FPV Racing Drone

Check Discount Price

• * High capacity of 350mah 30C, Small size of 6.5 * 11.5 * 71mm, is the great choice of Tiny Whoop
• * The weight of the 350mah 1s 30C 3.8v hv lipo battery is approx 8.5g/pcs, 0.8g heavier than the 300mAh battery
• * The battery connector is JST-PH 2.0, NOT work with stock Blade Inductrix, Blade Nano QX, Nano CPX, Blade mCX etc
• * This tiny whoop battery is a great choice for anyone flying a Tiny Whoop that uses for brushed whoop motors of any size and brushless 1s whoops
• * Newly developed chemistry HV 1S Battery, longer flight time and safer charging situation. Safer, higher quality and more powerful rate brings you higher speed flying experience